收藏本站
Pin / Control Functions
+In / -In – DC Voltage Input Ports
The V?I Chip input voltage range should not be exceeded. An internal
under / over voltage lockout-function prevents operation outside of the
normal operating input range. The BCM turns on within an input voltage
A
4
3
2
1
A
window bounded by the “Input under-voltage turn-on” and “Input over-
voltage turn-off” levels, as specified. The V?I Chip may be protected
against accidental application of a reverse input voltage by the addition
of a rectifier in series with the positive input, or a reverse rectifier in
shunt with the positive input located on the load side of the input fuse.
The connection of the V?I Chip to its power source should be
implemented with minimal distribution inductance. If the interconnect
inductance exceeds 100 nH, the input should be bypassed with a RC
damper to retain low source impedance and stable operation. With an
interconnect inductance of 200 nH, the RC damper may be 2 μF in series
with 0.3 Ω . A single electrolytic or equivalent low-Q capacitor may be
used in place of the series RC bypass.
+Out
-Out
+Out
-Out
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
B
C
D
E
H
J
K
L
M
N
P
R
T
+In
TM
RSV
PC
-In
PC – Primary Control
The Primary Control port is a multifunction node that provides the
following functions:
Bottom View
Enable / Disable – If the PC port is left floating, the BCM output is
enabled. Once this port is pulled lower than 2.4 Vdc with respect to
–In, the output is disabled. This action can be realized by employing
a relay, opto-coupler, or open collector transistor. Refer to Figures 1-
3, 12 and 13 for the typical enable / disable characteristics. This port
should not be toggled at a rate higher than 1 Hz. The PC port should
also not be driven by or pulled up to an external voltage source.
Primary Auxiliary Supply – The PC port can source up to 2.4 mA at
5.0 Vdc. The PC port should never be used to sink current.
Alarm – The BCM contains circuitry that monitors output overload,
input over voltage or under voltage, and internal junction temperatures.
The PC port will toggle in response to an over current or over
temperature fault and will remain low in response to an input
undervoltage / overvoltage fault.
TM and RSV – Reserved for factory use.
+Out / -Out – DC Voltage Output Ports
Two sets of contacts are provided for the +Out port. They must be
connected in parallel with low interconnect resistance. Similarly, two sets
of contacts are provided for the –Out port. They must be connected in
parallel with low interconnect resistance. Within the specified operating
range, the average output voltage is defined by the Level 1 DC behavioral
model of Figure 19. The current source capability of the BCM is rated in
the specifications section of this document.
The low output impedance of the BCM reduces or eliminates the need
for limited life aluminum electrolytic or tantalum capacitors at the input
of POL converters.
Total load capacitance at the output of the BCM should not exceed the
specified maximum. Owing to the wide bandwidth and low output
impedance of the BCM, low frequency bypass capacitance and
significant energy storage may be more densely and efficiently provided
by adding capacitance at the input of the BCM.
Signal
Name
+In
–In
TM
RSV
PC
+Out
–Out
Figure 14 — BCM pin configuration
Designation
A1-E1, A2-E2
L1-T1, L2-T2
H1, H2
J1, J2
K1, K2
A3-D3, A4-D4,
J3-M3, J4-M4
E3-H3, E4-H4,
N3-T3, N4-T4
vicorpower.com
800-735-6200
V?I Chip Bus Converter
BCM352F110T300A00 & BCM352T110T300A00
Rev. 1.6
Page 6 of 11
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EBM08DTAH-S189 CONN EDGECARD 16POS R/A .156 SLD
R1S-2405-R CONV DC/DC 1W 24VIN 05VOUT
B384F120T30-EB HV BCM BUS CONVERTER EVAL BOARD
EBM08DTAD-S189 CONN EDGECARD 16POS R/A .156 SLD
A9CAG-1205F FLEX CABLE - AFG12G/AF12/AFE12T
RO-053.3S/P CONV DC/DC 1W 05VIN 3.3VOUT
B048F480T30-EB EVAL BOARD 48V OUT 300W SMD
GBM10DRYN-S13 CONN EDGECARD 20POS .156 EXTEND
相关代理商/技术参数
BCD352F125T300A00 功能描述:HV BCM BUS CONVERTER EVAL BOARD RoHS:是 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:V-I Chip™, BCM™ 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:True Shutdown™ 主要目的:DC/DC，步升 输出及类型:1，非隔离 功率 - 输出:- 输出电压:- 电流 - 输出:1A 输入电压:2.5 V ~ 5.5 V 稳压器拓扑结构:升压 频率 - 开关:3MHz 板类型:完全填充 已供物品:板 已用 IC / 零件:MAX8969
BCD352F440T330A00 功能描述:HV BCM BUS CONVERTER EVAL BOARD RoHS:是 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:V-I Chip™, BCM™ 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:True Shutdown™ 主要目的:DC/DC，步升 输出及类型:1，非隔离 功率 - 输出:- 输出电压:- 电流 - 输出:1A 输入电压:2.5 V ~ 5.5 V 稳压器拓扑结构:升压 频率 - 开关:3MHz 板类型:完全填充 已供物品:板 已用 IC / 零件:MAX8969
BCD380P475C1K2A30 制造商:Vicor Corporation 功能描述:BCD380P475C1KA30 Eval Board
BCD380P475C1KA30 制造商:Vicor Corporation 功能描述:BCD380P475C1KA30 Eval Board
BCD380P475T1K2A30 功能描述:BCM380y475x1K2A30 VI Chip? BCM? DC/DC, Step Down 1, Isolated Outputs Evaluation Board 制造商:vicor corporation 系列:VI Chip? BCM? 零件状态:有效 主要用途:DC/DC，步降 输出和类型:1，隔离 功率 - 输出:1200W 电压 - 输出:47.5V 电流 - 输出:25.7A 电压 - 输入:260 V ~ 410 V 稳压器拓扑:降压 频率 - 开关:1.18MHz 板类型:完全填充 所含物品:板 使用的 IC/零件:BCM380y475x1K2A30 标准包装:1
BCD384F120T300A00 功能描述:BCM384x120y300A00 VI Chip? BCM? DC/DC, Step Down 1, Isolated Outputs Evaluation Board 制造商:vicor corporation 系列:VI Chip? BCM? 零件状态:有效 主要用途:DC/DC，步降 输出和类型:1，隔离 功率 - 输出:300W 电压 - 输出:12V 电流 - 输出:27.7A 电压 - 输入:360 V ~ 400 V 稳压器拓扑:降压 频率 - 开关:1.95MHz 板类型:完全填充 所含物品:板 使用的 IC/零件:BCM384x120y300A00 标准包装:1
BCD384F480T325A00 功能描述:EVALUATION BOARD BCM BUS CONVERT RoHS:是 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:V-I Chip™, BCM™ 标准包装:1 系列:- 主要目的:DC/DC，步降 输出及类型:1，非隔离 功率 - 输出:- 输出电压:3.3V 电流 - 输出:3A 输入电压:4.5 V ~ 28 V 稳压器拓扑结构:降压 频率 - 开关:250kHz 板类型:完全填充 已供物品:板 已用 IC / 零件:L7981 其它名称:497-12113STEVAL-ISA094V1-ND
BCD40 制造商:EDI 制造商全称:Electronic devices inc. 功能描述:100mA SILICON CARTRIDGE RECTIFIERS